Pay attention to the operation items of plastic shredder

Before the production operation, the staff need to check the plastic shredder to avoid problems during the operation. There are also some operations that need to be paid attention to when the plastic shredder is working, so what should be paid attention to?

1. Before working, the plastic shredder should check whether the screws and bolts of the body are loose, so as to avoid damage to the body due to loose bolts during startup, which will bring unnecessary trouble.

2. After the equipment has been working for a period of time, it is necessary to check the lubrication system of the bearing of the machine body immediately to check whether there is heat, deformation, etc., and add butter in time to ensure that the plastic shredder can work smoothly.

3. When the plastic shredder is working for a period of time, it is necessary to check whether the wearing parts of the equipment are worn in time, such as the blade. If the wear is serious, it should be replaced immediately, so as not to delay the next production operation.

4. Pay attention to the power system of the equipment during the use of the equipment. For example, check whether the line is aging or short-circuited. If there is a need to find out the cause and replace the line in time, whether it is for the equipment or the operator. Said to be relatively safe.

5. When using the plastic shredder, pay attention to the overall temperature cycle of the equipment, and combine it in an orderly manner to prevent the body from overheating and affecting the output of the equipment.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。