How to deal with the failure of large twin shaft shredder?

Have you ever had any problems when using a large double shaft shredder? What should we do at this time? Check out these coping strategies to help you solve your problems.

1. Bearing heating: It means that the bearing is short of oil and needs to be refueled in time. Of course, too much refueling will also cause the bearing to heat up. Be sure to check the oil level when refueling. If the bearing is damaged, replace it in time. The upper cover of the bearing is too tight and needs to be adjusted. Bolts should be moderately tight.

2. Abnormal vibration: It indicates that the material is too large. You can check the feed size. Uneven wear indicates that the blade needs to be replaced, the rotor is unbalanced and needs to be adjusted, and the foundation is not handled properly, so the anchor bolts need to be inspected and reinforced.

3. Belt flipping: This indicates that the belt is worn and the V-belt needs to be replaced. Because of the belt transmission assembly problem, the pulleys need to be adjusted on the same plane. Be sure to pay attention to the quality of the V-belt itself.

4. Excessive granularity: It means that the blade of the large double-shaft shredder is worn and needs to be adjusted or replaced. The gap between the blade and the plate is too large. It is generally adjusted to 15-20mm. Excessive feed granularity will also affect the Discharge granularity.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。