How to maintain the blades of the double shaft shredder?

For the maintenance of the shredder blade, I believe that many customers who have purchased the shredder worry about it. How can it be better to use it?

1. The flange nut of the double shaft shredder blade must be tight when installed. The loose saw blade will slip during rotary cutting. The over-tightening saw blade will have internal damage or deformation affecting the cutting effect.

2. Regularly check the radial runout of the machine's main shaft, and the swing to ensure the fit of the two-axis shredder blades to each other.

3. The twin-shaft shredder blade must be equipped with protective equipment and checked for proper operation of the saw guard before cutting.

4. Use the largest possible flange to make the saw blade run more smoothly, the flange size should be the same, the flange size is 1/3 of the saw blade diameter sawing effect is better.

5. The double-shaft shredder blade should be idling for 30 seconds after the installation is stable, and then start the cutting work after determining that everything is normal.

6. The alloy head of the twin-shaft shredder has a sharp and sensitive cutting edge, so care must be taken to protect the alloy head from damage during blade movement, installation and disassembly.

7. The double shaft shredder blade must be cleaned of debris on the spindle and flange before installation. The surface of the flange should be flat, clean and perpendicular to the axis.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。