Safety protection in metal shredder production

Scrap metal shredders are highly efficient equipment in the metal recycling industry, but some customers install metal shredders that have huge potential safety hazards at work. it is surprising that the workplace is not properly protected. what should we do?

The safety protection of scrap metal shredders is mainly to prevent metal fragments from flying out of the fragments. this cannot be done by relying on baffles alone. First of all, the metal shredder must be placed away from the crowd. the surroundings of the construction site need to be enclosed. the height of the enclosure can be based on the actual situation. And the place where flying debris is most likely to encounter needs to be thickened. The second is to set up a special shelter for the operators in the construction environment and install protective iron sheets. An iron plate wall with a thickness of 10 - 12 cm is arranged opposite the hole for conveying materials, and the height of the iron plate wall should be able to prevent fragments from flying over.

When using scrap metal shredders, we must take these protective measures into full consideration. As a shredder manufacturer, we should not only make the equipment safe and free from troubles, but also give safety instructions on site installation. only in this way can we truly solve the problem of safety protection.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。