The tire shredder main shaft is one of the most important structures on the tire shredder. Therefore, it is necessary to pay attention to the correction work. If the main shaft is bent, there will be serious consequences. We will introduce you to the following. To, how to carry out the spindle correction of the tire shredder, let's take a look at it.
The tire shredder spindle is one of its important structures, the influence of the spindle bending:
1. Affect the service life of the spindle;
2. The blade produces interference cutting to reduce the service life of the blade;
3. Affect the size of the processed materials;
4. Reduce bearing life;
5. not easy to assemble;
6. If the reducer is directly connected, the service life of the reducer will be reduced; the belt drive will be used to easily jump the belt and reduce the service life of the V-belt.
Therefore, the accuracy of the spindle must be strictly required to ensure the service life of the equipment, increase the yield and meet customer requirements.
The tire shredder correction steps are as follows:
1. Use the press to calibrate the fourth segment.
2. Use the four-jaw chuck to clamp the fifth section, use the central frame support structure to support the third section, and align the fourth section center. Hit the center eye, then use the thimble to withstand, remove the center frame, the front section, the third section of the finished car, and the vacant part of the rough car.
3. Spindle head change processing. Use the four-jaw chuck to clamp the front section, use the center frame support structure to support the fifth section, and align the fourth section center. Hit the center eye, then use the thimble to withstand, remove the center frame, the fifth section of the fine car, the rough car vacant part.
Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。
Welcome to visit Henan Honest website. If you want to learn more about our equipments, Contact us Now to find out what we can do for you next project!
