How to solve the blockage of the plastic shredder​?

Clogging occurs during operation, not only for plastic shredders, but also for many mechanical equipment. This very common phenomenon is very easy to solve. Users should not worry when this situation occurs in production. They can solve it directly by finding the correct method. Most of the blockages of mechanical equipment are caused by improper operation and blade wear. Severe, caused by aging. How to solve the blockage of the plastic shredder? The following is the answer.

First, in the process of using the plastic shredder, the speed of feeding the staff is too fast, which causes an overloaded production of the equipment, and causes the plastic shredder blade to be unable to process the material in time, resulting in got clogged. Once this happens, we can properly slow down the feeding speed, or install a feeder that controls the feeding.

Second, the load of the plastic shredder is relatively heavy when it is first turned on. At this time, our feeding speed should not be too fast. The plastic shredder equipment needs to have an adaptation process. Speed up the feed. Let the equipment have a fully adapted transformation process. If you do the opposite, it will cause a blockage. Find the key to the problem, first shut down the equipment and then clean up all the clogged materials, adjust the correct feeding, and start the normal operation of the equipment.

Third, the blades of plastic shredders are engaged in long-term material shredding work every day. If the blades of plastic shredders are aging or severely worn, the strength of shredding materials will not meet the standard. The material will be blocked inside the equipment, we only need to replace the new blade. To keep the plastic shredder in good working condition, it is necessary to check the plastic shredder blade regularly.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。